Dual-Unit Technical Specifications (N4X-CNC-CUT)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| Base Enclosure Platforms | Any N4X-WM304, N4X-WM316L, N4X-FS304, N4X-DD316L, or custom H×W×D envelope | Single prototype builds or repeatable OEM multi-unit batches |
| Cutting Technology & Tolerance | Nitrogen-assist CNC fiber laser · ±0.15 mm (±0.006 in) positional accuracy | Oxide-free bright edges with zero thermal warping or mechanical work-hardening |
| Supported Cutout Geometries | HMI touchscreens, 22.5/30.5 mm keyed pushbuttons, DIN meters, thermal units, conduit glands | Keyways/anti-rotation notches cut cleanly in one continuous laser pass |
| Accepted Engineering Files | 2D DXF / DWG, 3D STEP / IGES, or dimensioned PDF sketch for CAD redraw | Approval drawing returned for sign-off before sheet nesting |
| Stainless Alloys & Gauges | AISI 304 or AISI 316L · 16 ga (1.5 mm), 14 ga (2.0 mm), or 12 ga (2.5 mm) | Pre-cut prior to final bending, TIG welding, passivation, and gasket pouring |
| Minimum Gasket Keep-Out Zone | 35 mm (1.38 in) from door outer edge; 25 mm (1.0 in) from internal stiffeners | Verified automatically during our engineering DFM check |
| Sub-Panel Tapping & Studs | Optional CNC-drilled/tapped M4–M8 DIN-rail & duct mounting grids on 12/10 ga sub-panel | Cuts panel-shop mechanical layout time directly on assembly benches |
| Standards & Documentation | Built to NEMA 250 Type 4X and UL 508A enclosure design requirements | Material mill certificates (304/316L) and ingress test reports available per project |
Target Applications & Operating Fit
- UL 508A panel shops and system integrators tired of burning hydraulic punches and cobalt hole saws in 14 ga stainless doors.
- OEM machine builders ordering repeatable HMI operator stations with exact Siemens, Allen-Bradley, Weintek, or Unitronics cutouts.
- Thermal-managed enclosure builds needing precise side-wall cutouts and bolt-hole patterns for NEMA 4X air conditioners.
- Fast-turnaround retrofit projects requiring drop-in stainless cabinets with pre-tapped sub-panels and removable gland plates.
Structural & Standards Engineering
- Nitrogen-shielded fiber laser leaves silver, unoxidized stainless cut edges that resist rust initiation right up to the HMI gasket.
- All cutouts are completed on flat blanks before forming and robot-poured polyurethane gasketing, guaranteeing zero metal shavings inside the finished cabinet.
- Pre-cut anti-rotation notches on 22.5 mm and 30.5 mm pushbutton holes prevent selector switches from spinning under operator torque.
- Engineering DFM review checks bezel clamp interference, door-latch clearance, and internal sub-panel depth before cutting begins.
5-Parameter Engineering Modification Scope
- Custom flush-mounted polycarbonate or tempered-glass NEMA 4X viewing windows with stainless retaining frames.
- Laser-etched permanent stainless equipment tags, legend markings, or part numbers directly on the brushed door.
- Custom weld-stud arrays on the inside door face for mounting operator-interface wiring brackets and cable clips.
- Pre-cut & tapped 12 ga / 10 ga galvanized or stainless sub-panels matching customer EPLAN or AutoCAD Electrical layouts.
- Removable multi-entry cable gland plates pre-cut for M16–M63 metric or 1/2-in to 2-in NPT stainless cord grips.
Technical FAQs
Why is factory fiber-laser cutting better than punching or hole-sawing stainless steel in our shop?
Austenitic 304 and 316L stainless steels work-harden rapidly under mechanical drills and hole saws, causing heat discoloration, rough burrs that slice HMI gaskets, and stray metal swarf. Nitrogen-assist fiber laser cutting delivers ±0.15 mm clean edges before assembly.
What file formats do I need to send for a 15-minute formal quote on N4X-CNC-CUT?
Send a 2D DXF/DWG, 3D STEP, or even a marked-up PDF showing enclosure H×W×D, alloy (304 or 316L), and cutout count/sizes. Our engineering desk returns a formal quote within 15 minutes and issues a sign-off CAD drawing prior to production.
How close can an HMI or pushbutton cutout be placed to the edge of the door?
Keep cutout edges at least 35 mm (1.38 in) inside the outer door edge so bezel mounting clamps clear both the poured-in-place polyurethane gasket track and the folded door return flange.
Does cutting openings in the factory preserve the NEMA 4X rating?
Clean ±0.15 mm edges provide an ideal flat sealing surface, and final assembly rating depends on installing matching UL/NEMA Type 4X rated HMI bezels, pushbuttons, viewing windows, and cord grips torqued to manufacturer specifications.
Related NEMA 4X Supply Models
304 Sanitary Wall-Mount Sloped Roof
20° sloped-roof AISI 304 wall-mount enclosure (16/14 ga) with continuous poured-in-place PU gasket, concealed hinge, and brushed #4 sanitary finish.
View Datasheet →304 Free-Standing Washdown Control Cabinet
Floor-standing single-door AISI 304 cabinet (14/12 ga) with 15° sloped roof, 3-point padlockable stainless handle, sanitary leveling feet, and heavy 10 ga sub-panel.
View Datasheet →316L Marine/Chemical Wall-Mount
AISI 316L molybdenum-alloyed wall-mount enclosure (16/14 ga) with continuous 316 SS piano hinge, screw-down/quarter-turn 316 latches, and seamless poured PU gasket.
View Datasheet →