Dual-Unit Technical Specifications (N4X-FS304)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| Standard Dimensions (H × W × D) | 1600×800×400 mm to 2000×1000×600 mm (63.0×31.5×15.7 in to 78.7×39.4×23.6 in) | Custom depth up to 800 mm (31.5 in) for large VFD heat sinks |
| Enclosure Alloy & Finish | AISI 304 Stainless Steel, #4 Brushed Exterior | Continuous seam-welded body with internal structural stiffener channels |
| Body & Door Thickness | 14 ga (2.0 mm) standard body/door; 12 ga (2.5 mm) heavy-duty option | Reinforced door frame channels carry heavy HMIs and disconnect switches |
| Roof & Base Architecture | 15° sloped sanitary top + 150 mm (6.0 in) hygienic stainless leveling feet or bolted plinth | Open-leg sanitary feet enable full floor squeegee and hose access underneath |
| Door Gasket System | Continuous poured-in-place polyurethane (PU) gasket (-40°C to +100°C) | High-recovery closed-cell compression across full 2000 mm door perimeter |
| Latching & Hinge Hardware | 3-point 316 SS padlockable L-handle with internal rod guides + heavy continuous SS hinge | Optional flange disconnect cutout for rotary or variable-depth handles |
| Internal Mounting Sub-Panel | 10 ga (3.0 mm) heavy-duty galvanized steel back panel on depth-adjustable rails | Supports heavy line reactors, isolation transformers, and multi-drive banks |
| Standards & Documentation | Built to NEMA 250 Type 4X and UL 508A enclosure design requirements | Material mill certificates (304/316L) and ingress test reports available per project |
Target Applications & Operating Fit
- Central PLC and multi-VFD motor control centers positioned directly on food, beverage, or packaging plant floors.
- OEM machinery main electrical panels requiring full-height access, flanged disconnect provisions, and floor-level washdown clearance.
- High-load industrial controls requiring depth-adjustable 10 ga (3.0 mm) mounting panels and internal lifting eyebolts.
- Sites needing sealed Type 4X closed-loop enclosure air conditioners or air-to-water heat exchangers pre-cut on the side wall.
Structural & Standards Engineering
- Three-point stainless rod latching pulls top, center, and bottom of tall doors uniformly into the poured-in-place PU gasket.
- Internal galvanized mounting sub-panel slides on C-channel depth rails for front-or-rear component clearance adjustment.
- Removable heavy-gauge stainless lifting lugs rated for crane positioning prior to permanent floor anchoring.
- Door-mounted stainless print pocket and perforated vertical door rails for clean HMI cable harness routing.
5-Parameter Engineering Modification Scope
- Pre-cut side-wall mounting apertures for closed-loop NEMA 4X enclosure air conditioners or vortex coolers.
- Right-hand flange disconnect cutout matching Allen-Bradley, Schneider, or Siemens rotary/flange operators.
- 100 mm or 200 mm welded stainless plinth base with removable front/side cable-entry skirts instead of leveling feet.
- Factory laser-cut HMI, meter, and pushbutton arrays on the main door prior to final passivation.
- Internal 304 stainless sub-panel, swing-out inner dead-front door, and LED cabinet service light kit.
Technical FAQs
Should I specify sanitary leveling feet or a solid plinth base on the N4X-FS304?
In food and dairy plants requiring floor washdown under cabinets, 150 mm (6 in) sealed sanitary leveling feet allow unobstructed hose and squeegee access. For dry-floor or bottom-trench cable entry, a bolted stainless plinth base provides enclosed cable routing.
How is thermal load managed inside a sealed free-standing NEMA 4X VFD cabinet?
Because louvered fans compromise Type 4X hose-down integrity, high-wattage VFD enclosures use closed-loop NEMA 4X enclosure air conditioners or air-to-water heat exchangers. We can laser-cut the exact side-wall cooling cutout from your thermal unit DXF.
What is the thickness of the internal mounting panel?
N4X-FS304 ships standard with a 10 ga (3.0 mm) formed galvanized steel sub-panel mounted on depth-adjustable rails to prevent bowing under heavy transformers and variable frequency drives.
Can N4X-FS304 accommodate a main flange disconnect handle?
Yes. Specify your disconnect manufacturer and switch amperage in your 15-minute formal quote brief so we fabricate the matching flange-cutout door and mechanical interlock.
Related NEMA 4X Supply Models
304 Sanitary Wall-Mount Sloped Roof
20° sloped-roof AISI 304 wall-mount enclosure (16/14 ga) with continuous poured-in-place PU gasket, concealed hinge, and brushed #4 sanitary finish.
View Datasheet →316L Marine/Chemical Wall-Mount
AISI 316L molybdenum-alloyed wall-mount enclosure (16/14 ga) with continuous 316 SS piano hinge, screw-down/quarter-turn 316 latches, and seamless poured PU gasket.
View Datasheet →316L Double-Door Bay Enclosure
Heavy 12 ga (2.5 mm) AISI 316L double-door floor-mount enclosure with removable center mullion, overlapping 3-point 316 SS latches, and full-width 10 ga back panel.
View Datasheet →