Dual-Unit Technical Specifications (N4X-WM316L)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| Standard Dimensions (H × W × D) | 300×250×150 mm to 1200×900×300 mm (11.8×9.8×5.9 in to 47.2×35.4×11.8 in) | Matches common imperial wall-mount footprints including 24×20×10 in & 48×36×10 in |
| Enclosure Alloy & Chemistry | AISI 316L Stainless (16–18% Cr, 10–14% Ni, 2–3% Mo, <=0.03% C) | Low carbon eliminates weld-zone carbide precipitation (sensitization) |
| Body & Door Thickness | 16 ga (1.5 mm) compact sizes; 14 ga (2.0 mm) for >= 600 mm H (24 in) | Full TIG-welded seams pickled and passivated after grinding |
| Mounting Architecture | External 12 ga (2.5 mm) 316L welded mounting brackets (zero rear penetration holes) | Optional pole-mount strap kit in 316 SS for pier and coastal mast installations |
| Door Gasket System | Continuous poured-in-place polyurethane (PU) (-40°C to +100°C) | Optional silicone or Viton/FKM fluorocarbon seal for harsh solvent vapors |
| Hinges & Clamps | Full-length 316 SS continuous piano hinge + 316 SS screw clamps or quarter-turn latches | Integrated stainless padlock hasp standard on hinged door |
| Internal Mounting Sub-Panel | 12 ga (2.5 mm) galvanized steel or optional 316L stainless mounting panel | Mounted on internal weld studs with brass/SS grounding hardware |
| Standards & Documentation | Built to NEMA 250 Type 4X and UL 508A enclosure design requirements | Material mill certificates (304/316L) and ingress test reports available per project |
Target Applications & Operating Fit
- Coastal marine terminals, container crane controls, dockside shore-power stations, and offshore deck instrumentation.
- Municipal wastewater treatment headworks, H2S gas zones, lift stations, and desalination reverse-osmosis skids.
- Chemical processing, fertilizer handling, brine pickling, and coastal roadway/bridge telemetry cabinets.
- Cold-climate outdoor installations subjected to winter de-icing road salts and external sleet/ice buildup.
Structural & Standards Engineering
- Every exposed external fastener, hinge pin, clamp bolt, and mounting bracket is matched to 316 stainless steel to prevent galvanic tea-staining.
- Low-carbon 316L grade protects TIG-welded corners from intergranular corrosion in continuous chloride mist.
- Deep rolled door-opening gutter lip prevents wind-driven salt spray and melting ice from bridging the gasket interface.
- Available in both flat-top with integrated rain hood and 15° sloped-top marine roof variants.
5-Parameter Engineering Modification Scope
- Factory fiber-laser cutouts for marine instrumentation, purge connections, and 316L cable gland plates.
- Internal sun-shield canopy / solar heat-deflection roof + side panels for tropical coastal UV exposure.
- 316 stainless steel anti-condensation breather-drain valve and DIN-rail thermostat/space heater package.
- Viton/FKM or silicone gasket upgrade for aromatic hydrocarbon, chlorine vapor, or sub-zero arctic service.
- Electropolished exterior finish option for ultra-low surface roughness in aggressive offshore salt-fog zones.
Technical FAQs
Why specify 316L instead of standard 316 or 304 for welded NEMA 4X enclosures?
The 2–3% molybdenum in 316L dramatically increases resistance to chloride pitting compared to 304, while the 'L' low-carbon limit (<=0.03% C) prevents chromium carbide precipitation along TIG weld heat-affected zones—the exact points where standard 316 can corrode first in salt spray.
Are the hinges and clamps also 316 stainless steel?
Yes. Mixing 304 hardware onto a 316L body causes premature rust streaking around latches and hinges in marine air. N4X-WM316L uses matched 316 stainless external hardware throughout.
Can N4X-WM316L match standard imperial 24×20×10 in or 48×36×10 in footprints?
Yes. We fabricate both standard metric dimensions and direct imperial retrofit footprints (including 24×20×10 in, 24×24×8 in, 36×30×10 in, and 48×36×10 in) so replacement cabinets drop onto existing wall anchors.
Does NEMA 4X cover outdoor freezing rain and salt-spray conditions?
Yes. NEMA 250 Type 4X includes external ice formation resistance, hose-directed water protection, windblown dust exclusion, and corrosion resistance validation.
Related NEMA 4X Supply Models
304 Sanitary Wall-Mount Sloped Roof
20° sloped-roof AISI 304 wall-mount enclosure (16/14 ga) with continuous poured-in-place PU gasket, concealed hinge, and brushed #4 sanitary finish.
View Datasheet →304 Free-Standing Washdown Control Cabinet
Floor-standing single-door AISI 304 cabinet (14/12 ga) with 15° sloped roof, 3-point padlockable stainless handle, sanitary leveling feet, and heavy 10 ga sub-panel.
View Datasheet →316L Double-Door Bay Enclosure
Heavy 12 ga (2.5 mm) AISI 316L double-door floor-mount enclosure with removable center mullion, overlapping 3-point 316 SS latches, and full-width 10 ga back panel.
View Datasheet →