304 & 316L Stainless NEMA 4X · CAD Laser Pre-Cutouts · 15-Minute Formal Quote
MODEL CODE N4X-DD316LSERIES Double-Door HeavyCATEGORY Free-Standing & Double-Door

N4X-DD316L — 316L Stainless Steel Double-Door Bay NEMA 4X Control Enclosure

Wide-bay AISI 316L double-door control cabinet engineered for high-density PLC/SCADA panels, marine switchgear, and wastewater MCC assemblies in corrosive environments. Built to NEMA 250 Type 4X and UL 508A enclosure design requirements; material mill certificates (304/316L) and ingress test reports available per project.

Request 15-Minute Formal Quote WhatsApp +86 13392250172Email jacklau@nema4xsupply.com

Dual-Unit Technical Specifications (N4X-DD316L)

ParameterEngineering SpecificationReference / Notes
Standard Dimensions (H × W × D)1600×1200×400 mm to 2000×1600×600 mm (63.0×47.2×15.7 in to 78.7×63.0×23.6 in)Direct dimensional match for 62×60×12 in and 72×60×18 in two-door footprints
Enclosure Alloy & FinishAISI 316L Stainless Steel (2–3% Mo, <=0.03% C), #4 BrushedAvailable in AISI 304 upon request for indoor non-chloride washdown bays
Body & Door Thickness12 ga (2.5 mm) body and reinforced dual doorsHeavy structural rigidity prevents racking during crane lifting and bay transport
Center Post ArchitectureRemovable bolted 316L center mullion with continuous EPDM/PU seal stripUnbolt center post to slide full-width pre-wired 10 ga sub-panels straight in
Door Gasket SystemContinuous poured-in-place polyurethane (PU) gasket (-40°C to +100°C)Dedicated compression perimeter on both left and right doors
Latching & InterlockMaster/slave 3-point 316 SS padlockable handles + heavy continuous 316 SS hingesOptional mechanical door interlock tied to right-hand main disconnect
Internal Mounting Sub-Panel10 ga (3.0 mm) formed galvanized steel full-width panel with center support stiffenerOptional split dual sub-panels for independent left/right circuit segregation
Standards & DocumentationBuilt to NEMA 250 Type 4X and UL 508A enclosure design requirementsMaterial mill certificates (304/316L) and ingress test reports available per project

Target Applications & Operating Fit

  • Large-scale wastewater pump stations, desalination control rooms, and chemical plant SCADA/PLC assemblies.
  • Marine vessel deck control centers, shipyard power distribution, and offshore platform automation skids.
  • High-voltage / low-voltage segregated industrial panels requiring dual doors and wide continuous sub-panel layouts.
  • Panel builders replacing 62×60×12 in or 72×60×18 in two-door stainless floorstand enclosures with factory pre-cut doors.

Structural & Standards Engineering

  • Removable center mullion gives panel shops unobstructed full-width access to drop in heavy wired 10 ga backplates.
  • Master-slave door overlap and dual 3-point stainless latching maintain uniform gasket squeeze along the entire center seam.
  • Heavy 12 ga (2.5 mm) welded floor-stand construction with integrated reinforced 316L lifting eyes and anchor flanges.
  • Dual bottom removable 316L gland plates separate incoming power feeders from shielded PLC instrumentation conduits.

5-Parameter Engineering Modification Scope

  • Factory fiber-laser pre-cutouts on either or both doors for large HMIs, selector switches, and flange disconnects.
  • Dual side-wall NEMA 4X closed-loop air conditioner or heat-exchanger mounting cutouts.
  • Internal vertical 316L barrier partition separating high-voltage VFD bays from 24 VDC PLC control sections.
  • 15° sloped sanitary top cap or outdoor double-skin solar sunshield roof for exposed coastal pads.
  • Heavy-duty 316L bolted anchor plinth (100/200 mm) or 300 mm floorstand legs for elevated washdown clearance.

Technical FAQs

How does a double-door NEMA 4X cabinet stay watertight along the center seam?

N4X-DD316L uses a gasketed, bolt-in center mullion post with an integral return lip. Each door closes independently against its own continuous poured-in-place PU gasket perimeter, while 3-point stainless rod latches apply uniform compression along top, middle, and bottom.

Can our panel shop install a single full-width wired sub-panel?

Yes. Unbolting the removable center mullion opens the entire cabinet width so your crew can lift and bolt a fully populated 10 ga backplate straight onto the internal depth rails.

What wall thickness is used on the N4X-DD316L?

We fabricate N4X-DD316L from 12 ga (2.5 mm) AISI 316L stainless steel to prevent cabinet twisting during rigging and maintain crisp door alignment across 1200–1600 mm wide spans.

Can you separate incoming power and PLC cable entries at the bottom?

Yes. Two independent removable 316L bottom gland plates with EPDM perimeter seals allow separate power and control conduit entry, or we can laser-cut exact conduit hole patterns directly into the plates.

N4X-WM304

304 Sanitary Wall-Mount Sloped Roof

20° sloped-roof AISI 304 wall-mount enclosure (16/14 ga) with continuous poured-in-place PU gasket, concealed hinge, and brushed #4 sanitary finish.

View Datasheet →
N4X-FS304

304 Free-Standing Washdown Control Cabinet

Floor-standing single-door AISI 304 cabinet (14/12 ga) with 15° sloped roof, 3-point padlockable stainless handle, sanitary leveling feet, and heavy 10 ga sub-panel.

View Datasheet →
N4X-WM316L

316L Marine/Chemical Wall-Mount

AISI 316L molybdenum-alloyed wall-mount enclosure (16/14 ga) with continuous 316 SS piano hinge, screw-down/quarter-turn 316 latches, and seamless poured PU gasket.

View Datasheet →